Thursday, 4 November 2010

Academic Paper Final Title

After a lot of thought, I decided to go with 'The Future of the Electric Car'.

I did originally start writing the report with all kinds of eco-friendly cars in mind, but I soon found that the 2000 word limit would make this very difficult. With this in mind I cut down to just one particular type of car, I chose the electric car as I was easily able to find a lot of information on it.

Monday, 18 October 2010

Academic Paper Title & Ideas

I have been spending the last few weeks trying to find a good subject within engineering in which I could create a debate around. I found it fairly difficult to find contentious ideas within engineering which would prove easy to gain information about as well as interest me. The following are a few of my ideas:


  • CAD, Has it Really Helped the Engineer? With this title I would look into seeing if the introduction of Computer Aided Design (CAD) has lessened the skill required for the modern day design engineer, and look at the advantages and disadvantages of the system.
  • The Future of the Eco-friendly Car: With this question I would research to find out if any of the current challengers to petrol & diesel cars are really in a position to make a big impact on the car industry and environment, or if more development is needed before one type can challenge?
  • The Future of Renewable Energy: With this report I would look into what the most popular forms of renewable energy are and what one will most likely be the type to replace older fossil fuel methods.
I have currently not made a final decision as I am looking to do further initial research to see which one would be able to give me more information. I am currently leaning towards the first idea, as this is more closely linked with my job in the design office.

Sunday, 3 October 2010

VARK Questionnaire

The VARK questionnaire aims to find out about the preferences for the way people work with information. Everyone has a preferred learning style and one part of it is the preference for the intake and output of ideas and information.

VARK stands for: Visual, Aural, Read/write, and Kinesthetic. Neil Fleming came up with the VARK questionnaire and learning inventory in 1987. Visual learners prefer thinking in pictures or visual aids, auditory learners learn best through listening, some people prefer reading and writing, whilst finally kinesthetic learners use experience or doing things as their main way or learning.

It is used by people around the world to aid their learning and get the best out of it by using the type which is most suited for them.

The questionnaire itself includes 16 questions, each with a type of answer which relates to either visual, aural, read/write and kinesthetic. At the end of the questionnaire you add up and score each to find your particular VARK learning preference. My scores worked out as:

Visual: 6
Aural: 2
Read/write: 5
Kinesthetic: 3

From these scores I can see that when learning I lean towards the visual and read/write styles. This I can see is in keeping with my personality, as I am sometimes against aural learning due to sometimes short attention spans. Whilst I feel I can learn well by doing things and by gaining experience, I feel my fear for being embarrassed when learning can hold me back, so I sometimes look to other styles. I am more confident when reading and writing which means I learn better using these styles.

I did find that with many of the questions I wanted to choose multiple answers or could not decide on one, most questions I did not really have a preference to the method of answering, which made me feel that the questionnaire might have been a bit inaccurate for me.
I still feel that it does depend on the circumstance to as what I think my best learning style is.

The Myers-Briggs Type Indicator Assessment (MBTI)

The Myers-Briggs Type Indicator (MBTI) is an assessment in the form of a psychometric questionnaire. It is designed to help understand how people make decisions.

The basis of the MBTI is the theory of psychological type which was described by C.G. Jung, it helps make it understandable and more useful to people.
As the assessment is designed to implement the theory of Jung, his theory should be understood before implementing the MBTI. Jung proposed two dichotomous pairs of cognitive functions, rational (Judgement) functions such as thinking and feeling, and irrational (Perception) functions such as sensing and intuition.
Briggs and Myers then went on to develop their own theory loosely based on Jungs, on which the MBTI is based. 

The MBTI contains four separate dichotomies, which lead to sixteen different types, all of different descriptions and characteristics. Each person is seen to normally prefer one of the pair in each dichotomy and work towards using that select one when in the correct circumstance. The four dichotomies are:

  • Extraversion (E) & Introversion (I)
  • Sensing (S) & Intuition (N)
  • Thinking (T) & Feeling (F)
  • Judgement (J) & Perception (P)
The user of the MBTI would select what they feel they use more from each pair to form their personality type. For example my type ended up being INFP, which is seen to be the same as only 2% of the population.

What does INFP mean for me?

After reading various portraits of an INFP personality online, I was extremely surprised to basically see a description of my personality, there were a couple of differences between me and the INFP personality, but I understand this will always be the case.

Various portraits online see the INFP personality to focus primarily on living internally, dealing with things according to how I feel about them and how they fit into my system of values. I am seen to be highly intuitive about people and I rely heavily on these intuitions to guide me. Other traits including being thoughtful and considerate, good listener, reserved in expressing emotion, valued friend and confidante. I am seen to be flexible and laid back, except when a value of mine is threatened, in which I can become aggressively defensive.

One part of a particular portrait described the following of an INFP:
 “INFPs do not like conflict, and go to great lengths to avoid it. If they must face it, they will always approach it from the perspective of their feelings. In conflict situations, INFPs place little importance on who is right and who is wrong. They focus on the way that the conflict makes them feel, and indeed don't really care whether or not they're right. They don't want to feel badly. This trait sometimes makes them appear irrational and illogical in conflict situations. On the other hand, INFPs make very good mediators, and are typically good at solving other people's conflicts, because they intuitively understand people's perspectives and feelings, and genuinely want to help them.” I found this to be exactly how I see myself, avoiding conflicts and sometimes focusing arguments to much on how I feel, sometimes not even caring whether or not I am correct.
I would also agree with the personality portrait on the basis that I am a more talented writer than talker, I find it awkward and uncomfortable with expressing themselves verbally, but have a better ability defining and expressing feelings on paper.

Website References:

Saturday, 25 September 2010

Learning Line

SWOT Analysis

Strengths
Reliable
Hard Worker
Various Sports
Open Minded
Organized
Level Headed
Understanding
Design methods
Driving
 

Weaknesses
Shy
Struggle to get point across
Verbal communication
Self confidence
Cooking
Presentations


Opportunities
Job improvements
Broader range of Engineering knowledge
Improved Confidence


Threats
Career Future worries
Not being able to remember Maths methods

About Me

Hi

My name is Dave, I'm a 23 year old Design Draughtsman from Southend-on-Sea.

I currently work for the company IPECO Holdings LTD, which is found over at Southend airport. I have recently finished a craft apprenticeship where I was trained firstly as a precision machinist, then secondly as a Design Draughtsman, which added up to 4 years. After 1 year of the apprenticeship I was offered the chance to train towards becoming a designer, something I was very interested in, so I gladly accepted the interview and managed to get the position. At the end of the apprenticeship I was offered the position of Design Draughtsman.

As a design draughtsman, my work involves Computer Aided Design (CAD) on the design package CATIA, through this I create 3D models/assemblies and then the drawings that the machinists and assemblers will use to make the parts. On top of this I need to write many various reports and procedures for the Environmental/Dynamic and Static testing that is carried out on each test.

IPECO are a fairly large company in the aerospace industry, primarily the company make flight deck seating for most aircraft companies, as well as executive passenger seats and divans for business jets. The company has also recently become more involved in the creation of galley equipment for aircraft's, which is what I have been assigned to work on. On finishing my ONC course at South East Essex College in Thurrock, my managers offered me the opportunity to continue my study at Anglia Ruskin, making the step up to HNC. The HNC is seen as a needed a qualification for the level of design draughtsman, so it is something I feel is needed to further my career. I also hope to use this to move up the qualification ladder towards degree level.